Installing your pump system step by step
Table of content
- Install the S-Connect app
- Connect a hose to the pump
- Attach a safety rope to the pump
- Mount the controller
- Connect the PV modules
- Connect the motor cable to the controller
- Connect accessories
- Connect the PV Cable to the controller
- Place the solar modules so that they face the sun
- Place the pump in water
- Turn on the controller
- Use the S-Connect app to manage your pump
The S1-200 is a very easy to install plug and play pump. Follow these steps to install the pump in any waterv source:
1. Install the S-Connect app
2. Connect a hose to the pump
3. Attach a safety rope to the pump
4. Mount the controller
For more information about mounting the controller, please refer to the following link:
5. Connect the PV modules
For more information, please refer to an example in the following link:
Connecting two 100 W PV modules in series
6. Connect the motor cable to the controller
7. Connect accessories
Function and use of remote tank switch
Function and use of tank full switch
Function and use of dry run protection
8. Connect the PV Cable to the controller
9. Place the solar modules so that they face the sun
10. Place the pump in water
11. Turn on the controller
How to switch on the S1-200 pump system
12. Use the S-Connect app to manage your pump
Using the S-Connect app with your pump system
