Se pare că ne vizitați din United States, însă site-ul actual pe care l-ai selectat să-l vizitați este din Romania. Doriți să schimbați site-ul?
If you need to deactivate any sensor inputs of your LORENTZ pump system, this is easy with the S-Connect app.
If the app is not used and inputs have been manually activated, jumper plugs (see picture below) need to be plugged into the sensor sockets.
Contact your local LORENTZ dealer to purchase jumper plugs.
Note: Jumper connectors cannot be used on the controller's "Tank switch input" if the "Remote Tank Switch" is activated.